In short
A machine shop usually enters the defence industry through a prime contractor or its system supplier, not directly through the Finnish Defence Forces. The foundation is an ISO 9001 quality system. On top of it, AQAP requirements add documentation, risk management, nonconformity handling and traceability. You also need access control and information security, security clearances for people on some projects, and an NCAGE code for NATO procurement. Start by finding out what the primes buy in and where you fall short of these requirements.
- PIA members’ turnover was about €4.2 billion in 2025 (+42%), about 55% from exports, with over 14,000 direct employees.
- On 24 September 2026 the Finnish government approved a €1 billion loan from the EU SAFE instrument for use in 2026–2030.
- AQAP requirements build on an ISO 9001 quality system.
- NATO tenders require an NCAGE code. In Finland it is applied for through the Finnish Defence Forces Logistics Command.
- Not every project requires security clearances, but access control and information security are almost always required.
Why is the defence industry interesting for machine shops now?
According to the Finnish Defence and Aerospace Industries association PIA, its members’ turnover was about €4.2 billion in 2025, up from about €3 billion a year earlier. Exports were about 55%. The association has just under 300 member companies, employing over 14,000 people directly and about 35,000 indirectly in Finland.
Demand will last. On 24 September 2026 the Finnish government approved a €1 billion loan agreement under the EU SAFE instrument. It will be used in 2026–2030 for joint procurement that strengthens ground forces’ capabilities and for drone and counter-drone development, among other things. Technology Industries of Finland names defence as one of the sources of order growth (order book in autumn 2026). Subcontractors are positioning themselves too: electronics manufacturer NOTE joins PIA on 1 January 2027.
Not all volume comes to Finland automatically, though. The contracts Patria and Germany signed in December 2025 for up to 876 armoured vehicles include local manufacturing in Germany. A subcontractor’s place has to be earned through quality, delivery reliability and price.
How does a machine shop get into the supply chain?
Most machine shops start as tier-two or tier-three suppliers, making parts or sub-assemblies for a prime contractor or its system supplier. For example, Survosen konepaja in Huittinen has built hulls for Sisu armoured vehicles for about three years, and defence work is now its largest business area (Yle, 20 Feb 2026).
The first step is to find out what the primes buy in and under which requirements. PIA and its member companies are a natural starting list. Ask for supplier requirements in writing and compare them with your quality system before your first quote.
Networks matter. Contacts with primes’ purchasing are made at subcontracting fairs and industry events, and system life cycles of 20–30 years make supplier relationships long.
What does AQAP mean in practice?
AQAP is NATO’s series of quality requirements. The Finnish Defence Forces and their prime contractors require it from the supply chain. The requirement for design, development and production is AQAP-2110. The requirements build on an ISO 9001 quality system and cover in particular document control, risk management, nonconformity handling and production traceability.
If you already have ISO 9001, do a gap analysis against AQAP. In a machine shop the work usually centres on three things: every batch is traceable to its material and heat number, nonconformities are handled and reported to the customer as agreed, and drawing and revision control has no gaps.
| Requirement | What it means | Where to start |
|---|---|---|
| Quality system | ISO 9001 and AQAP: documentation, risks, nonconformities, traceability. | Gap analysis and a schedule for the gaps. |
| Traceability | Each batch links to material, mill certificate and measurements. | Certificates and inspection records with every delivery. |
| Security | Access control, photography rules, information security; clearances for people where required. | A written policy before the first quote. |
| NCAGE code | NATO’s company code for tenders. | Apply through the Defence Forces Logistics Command. |
| Export control | Defence materiel and dual-use items require licences. | Check whether the rules cover your parts or technical data. |
Does a machine shop need a security clearance?
Not always. Formal security clearances were not needed for Survosen konepaja’s vehicle work. Access to the premises is still restricted, photography is banned in parts of the shop and information security gets special attention. According to Tuija Karanko, secretary general of PIA, some projects require Finnish citizenship and security clearances.
A clearance is ordered by a company or an authority and carried out by the Finnish Security and Intelligence Service (Supo) or the Defence Command. Nobody is vetted without their consent, and there are three levels: narrow, basic and extensive.
Prepare for the questions in advance: who can enter production, where drawings are kept, how files are transferred and who handles them.
What is an NCAGE code and do you need one?
An NCAGE code is NATO’s company code, required to take part in NATO tenders. Finnish companies held about 2,350 of them in October 2025. In Finland the code is applied for through the Finnish Defence Forces Logistics Command. NATO procurement also requires registration, for example in the NSPA supplier database.
If you only sell to a Finnish prime, you may not need the code straight away. It does make you easier to find in NATO supplier registers and in foreign primes’ purchasing.
Know export control too. Exporting defence materiel and dual-use items requires a licence, and the US ITAR and EAR rules can apply to parts and technical data that contain US technology.
Where to start: a readiness checklist for a machine shop
- Define your offer. Which parts and processes you offer: for example welded structures, machined parts or surface-treated assemblies.
- Do an AQAP gap analysis. Compare your ISO 9001 system with AQAP and schedule the gaps.
- Secure traceability. Mill certificates, batch marking and inspection records with every delivery.
- Put security in place. Access control, photography rules and drawing security, in writing.
- Apply for an NCAGE code if you aim at NATO or foreign primes’ procurement.
- Map the primes. Find out what they buy in and ask for supplier requirements in writing.
- Start with a defined delivery. A trial order shows quality and delivery reliability (becoming a second-source supplier).
- Plan for the long haul. Building a quality system and certification takes time, especially without defence experience.
Frequently asked questions
Can a small machine shop become a defence subcontractor?
Yes. Most start as tier-two or tier-three suppliers through a prime. What decides is the quality system, traceability and delivery reliability, not company size.
What is AQAP-2110?
NATO’s quality requirement for design, development and production. It builds on ISO 9001 and adds requirements for documentation, risk management, nonconformity handling and traceability, among others.
Is a security clearance needed?
Only on some projects. A clearance is ordered by a company or an authority and carried out by Supo or the Defence Command with the person’s consent. Access control and information security are almost always required.
Where do you get an NCAGE code?
In Finland, through the Finnish Defence Forces Logistics Command. The code is needed to take part in NATO tenders.
How long does it take to become a supplier?
It depends on where you start. Building a quality system and certification takes time, especially without defence experience. The first delivery usually starts with a defined trial order.
Let’s find the defence parts your machine shop suits
Ironspan maps a machine shop’s machines, processes and certificates into a capacity card and finds buyers whose parts suit them. The shop prices, quotes and delivers itself.
Sources
- PIA ry / STT Info: Puolustus- ja ilmailuteollisuuden jäsenyritysten luvut 2025 (7.4.2026)
- Vestbee: Finland to use €1B for defence (2026)
- Yle: Armeijan panssariautot syntyvät tarkan valvonnan alla huittislaisella konepajalla (20.2.2026)
- Kiwa: Laadunhallinta puolustusteollisuuden toimitusketjussa – AQAP ja ISO 9001 (23.10.2024)
- Suomen Yrittäjät: Olisiko yritykselläsi myytävää Natolle? Näin pääset alkuun (25.10.2025)
- Oulu ICT: Steps into NATO markets for Finnish businesses
- MTV Uutiset: Supon turvallisuusselvityksillä suojellaan valtakuntaa
- Alihankinta: Defense industry subcontracting – how an SME can find its way into NATO markets (24.9.2025)
- Defence Industry Europe: Patria and Germany sign major CAVS contracts for up to 876 armoured vehicles (18.12.2025)
- Evertiq: NOTE Finland joins Finnish defence industry association (5.11.2026)
Published 13 November 2026.
